Sure, here's a refined and simplified version of the original title focusing on the product keywords: 10 D-Ring Tie-Downs with Plastic Pan Fitting for Trailer Cargo

Hauling various items such as cars, motorcycles, bikes, camping equipment, appliances, and other freight on truck beds, trailers, and cargo vans is made much simpler when the tie-downs used are dependable, easy to install, and unobtrusive. These 10 Cargo Tie-Down Anchors for Trailers and Trucks offer a solution that can be fastened to any wooden or metal surface with just one screw, locking the base mount pan fitting underneath the D-ring for a tight bond. The bolt-on D-ring lies flush with its mounting surface, making it exceedingly versatile in use.

Once fastened, the D-ring serves as a reliable cargo anchor for tie-down straps, chains, and ropes. It is important to note that D-rings are intended for use as tie-down anchors only and should not be used for overhead lifting.

The working load limit of each tie-down component should be considered carefully: 1) The working load limit of each tie-down that goes from an anchor point on the vehicle to an anchor point on an article of cargo. 2) The working load limit of each tie-down that is attached to an anchor point on the vehicle, passes through, over, or around the article of cargo, and is then attached to an anchor point on the same side of the vehicle. 3) The working load limit of each tie-down that goes from an anchor point on the vehicle, through, over, or around the article of cargo, and then attaches to another anchor point on the other side of the vehicle.

Remember, a securement system is only as strong as its weakest component, so it is crucial to stay safe.

These flush mount D-rings come in a pack of 10 and are made of galvanized steel, with a zinc coating for corrosion and rust resistance. The D-ring has a working load limit of 533 pounds and is designed for a lifetime of dependable strength and versatility. The 2 1/4" x 2" D-ring has an attached welded bolting clip with a 3/8" diameter hole, allowing for easy attachment of S-hooks, J-hooks, bungee cords, motorcycle tie-downs, ropes, chains, and soft loops through the 1-1/2 by 1-13/16" inner clearance.

Installation is straightforward: first, install the plastic base with 2 screws into the 1/4" mounting holes, then screw the D-ring into it, securing the base mount pan fitting underneath for a tight bond. These anchors can be mounted on plywood and metal surfaces, on the floor or walls of your trailer or truck, providing a reliable solution for securing your loads.

product information: